ULD-40 - Ultrasonic Corona/Arcing Detector

The ULD-40 is an ultrasonic detector designed for corona and arcing inspections for predictive maintenance in electric utilities. Corona effect occurs when electricity is discharges into the surrounding atmosphere form a high voltage source. Corona effects and electrical arcs in the air emit ultrasounds. The role of the ULD-40 consists of capturing emitted ultrasounds and of translating them into the audible range. This equipment is perfect for high voltage maintenance program.

XDP II - Portable PD recorder and diagnostic system

The XDP II is a portable device for, online, factory and laboratory partial discharge measurement on electrical apparatus, or components. The XDP II can be used in accordance to IEC 60270. It records partial discharge measurements for computer analysis and diagnostic using the optional XDP II software for a PC. Using the appropriate accessories, the XDP II can be used in several applications.

WRT-10D : Winding resistance tester with Demagnetisation circuit

The WRT-10D is a High performance & High accuracy winding resistance tester, this unit has a built in Demagnetisation circuit to automatically or manually, demagnetize the transformers and avoid situations where the Current Transformer could cause the protection circuits to trip when re-energizing.

Next Previous

Cable and Phase Identification System

LCI - Live cable identification system (medium voltage)

The LCI helps in identifying energized electricity distribution power cables. (more)

SPI-II - GPS-Phase Identification System

The SPI-II is an instrument that enables remote identification of A-B-C electrical phases from all 50 and 60 Hz networks. Besides doing identification, the instrument enables verification of phase concordance and rotation in all safety and on any network points. This has become more and more essential whenever one wants to optimize the planning, the operation and the upkeep pf the electrical installations. No special cellular activation required; the customers use his cellular phone. (more)

VCI-3 - Voice Cable Identification System

The VCI-3 is a vocal cable identification and phasing system used during installation or maintenance works on de-energized three phase systems. (more)

Partial Discharge Detection

ADD - Arrester Default Detector

The ADD allows on-line arresters default detection on power lines up to 69 kV (or up to 45kV phase-to-neutral). (more)

DADD - Détecteur de défauts diélectriques (French only)

The ADD allows on-line arresters default detection on power lines up to 69 kV (or up to 45kV phase-to-neutral). (more)

HFCT-20 20 mm HF Clamp-On

The ADD allows on-line arresters default detection on power lines up to 69 kV (or up to 45kV phase-to-neutral). (more)

PDS - Partial Discharge Scanner

The PDS allows online partial discharge detection on underground cable accessories and equipment for security/maintenance purposes. This equipment is perfect for a high voltage predictive maintenance program. The PDS is very accurate to detect partial discharge on cable joints (XLPE/EPR type), switchgear, elbows, Cable Terminations, and more. (more)

ULD-40 - Ultrasonic Corona/Arcing Detector

The ULD-40 is an ultrasonic detector designed for corona and arcing inspections for predictive maintenance in electric utilities. Corona effect occurs when electricity is discharges into the surrounding atmosphere form a high voltage source. Corona effects and electrical arcs in the air emit ultrasounds. The role of the ULD-40 consists of capturing emitted ultrasounds and of translating them into the audible range. This equipment is perfect for high voltage maintenance program. (more)

ULD-406 - Contact Probe

The contact probe is an accessory of the ULD-40, our Ultrasonic Corona/Arcing Detector. The magnetic probe detects internal discharges caused by insulation breakdown in transformers, capacitors and switchgears. (more)

XDP II - Portable PD recorder and diagnostic system

The XDP II is a portable device for, online, factory and laboratory partial discharge measurement on electrical apparatus, or components. The XDP II can be used in accordance to IEC 60270. It records partial discharge measurements for computer analysis and diagnostic using the optional XDP II software for a PC. Using the appropriate accessories, the XDP II can be used in several applications. (more)

XDP SOFT

This software is used to manage the partial discharge recordings made with the XDP. It is an easy to use option that allows the expertise to evolve by following-up the wave forms of partial discharges found on the cables and joints of underground electrical networks. (more)

XDP-010

The inductive probe is an accessory of the XDP, our partial discharge detector. The probe detects the magnetic field generated by partial discharges on high voltage equipments equipped with grounding wire. (more)

XDP-013 - Partial Discharge Differential Sensor

The Differential Sensor with Double Spatula allows reducing ambient noise and handling when measuring partial discharge on MV/HV cable joints and elbows. Has been designed to detect partial discharge on insulated cable joints (XLPE/EPR type). The sensor is used with the XDP, an online Partial Discharge Detection System for underground cable accessories and equipment for security/maintenance purposes. (more)

XDP-14 - Partial Discharge Differential Sensor for Elbows

The Differential Sensor with Double Spatula allow reducing ambient noise and handling when measuring partial discharge on MV/HV cable elbows. The sensor is used with the XDP, an online Partial Discharge Detection System for underground cable accessories and equipment for security/maintenance purposes. (more)

XDP-TRANS - Distribution Transformer PD Measuring Kit

This Partial Discharge Measuring Kit, for distribution transformers, provides you with the easiest way to measure Partial Discharge in your single phase distribution transformers that are used on line up to 35kV (up to 25 kV phase-to neutral). (more)

Micro-Ohmmeters & Miscellanious Test Equipment

AL-40 - Welded Electrical connections Tester

The AL-40 allows a precise and easy quality control of welded electrical connections. The instrument measures the electrical resistance formed by the fusion of the weld with the conductors. The equipment has been designed specifically to test electrical connections/exothermic welds (Cadweld®) and it is the most accurate and competitive on the market in its category. (more)

DOC-2000 - Distribution Transformer Tester

The DOC-2000 can determine the presence of a short circuit and/or open circuit in a distribution transformer without disconnecting the seconday winding!! The unit is designed to be used with a hot stick which allows the user to have both feet on the ground at a safe distance. (more)

DRM-10A - 10 amp Micro-ohmmeter for resistance from 0.01 micro ohm to 200 ohms

The DRM-10A micro-ohmmeter can be used to measure very low resistances which vary from 0,01µΩ to 200Ω. This is the most accurate on the market in its category. (more)

DRM-40 - Micro-ohmmeter for resistance from 0.01 micro ohm to 200 ohms

The DRM-40 micro-ohmmeter can be used to measure very low resistances which vary from 0,01 micro ohm to 200 ohms. This is the most accurate and competitive on the market in its category. It is used for quality control of smelting parts, control of mechanical joints, electrical connections, for inspection of contacts, circuit breakers, power fuses and more. (more)

Get-401

The GET-401 is an easy-to-use and accurate Grounding Jumper Tester using an exclusive technique. The equipment guarantees your Protective Ground Set integrity. The resistance measurements guarantee that your Protective Grounding Sets are always in good condition. The Get-401 is ideal for a regular maintenance program. (more)

Substation Maintenance Test Equipment

CTT - Current Transformer Tester

The CTTx2 & CTTx5 are rugged and easy to use current transformer testers, that offer Automatic & Manual testing modes. These instruments are designed to deliver fast and reliable measurements. (more)

DOC-2000 - Distribution Transformer Tester

The DOC-2000 can determine the presence of a short circuit and/or open circuit in a distribution transformer without disconnecting the seconday winding!! The unit is designed to be used with a hot stick which allows the user to have both feet on the ground at a safe distance. (more)

LRM-10 - Contact Resistance Measurement Kit

10 Amp Low Resistance Meter for electrical interconnections integrity testing The LRM-10's very low resistances measurments from 0,01 µΩ to 200Ω are targeted toward verifying the quality contact interfaces. (more)

Power Transformer / AE-150

Application and Operation Powers transformers are critical to Transmission and Distribution substations. In fact, losing a unit can have a major financial consequence. To protect your investment, use Acoustic Emission Testing. This technique is superior to electric methods for on-site tests. (more)

WRT-10 - Winding Resistance Tester

The WRT-10 is a high performance winding resistance tester designed for Power Transformer and large motor applications. (more)

WRT-10D : Winding resistance tester with Demagnetisation circuit

The WRT-10D is a High performance & High accuracy winding resistance tester, this unit has a built in Demagnetisation circuit to automatically or manually, demagnetize the transformers and avoid situations where the Current Transformer could cause the protection circuits to trip when re-energizing. (more)

Cable and Phase Identification System

SPI-II - GPS-Phase Identification System

The SPI-II is an instrument that enables remote identification of A-B-C electrical phases from all 50 and 60 Hz networks. Besides doing identification, the instrument enables verification...

See this product line

Partial Discharge Detection

XDP II - Portable PD recorder and diagnostic system

The XDP II is a portable device for, online, factory and laboratory partial discharge measurement on electrical apparatus, or components. The XDP II can be used in accordance to IEC 60270....

See this product line

Micro-Ohmmeters & Miscellanious Test Equipment

DRM-10A - 10 amp Micro-ohmmeter for resistance from 0.01 micro ohm to 200 ohms

The DRM-10A micro-ohmmeter can be used to measure very low resistances which vary from 0,01µΩ to 200Ω. This is the most accurate on the market in its category.

See this product line

Substation Maintenance Test Equipment

Power Transformer / AE-150

Application and Operation Powers transformers are critical to Transmission and Distribution substations. In fact, losing a unit can have a major financial consequence. To protect your...

See this product line

Web site designed by SYN Média inc.