ALROC

Alroc - AGPB3-1000V

AGPb3-1000V pliers allow to perform a circular and longitudinal cutting on LV cables with a lead sheath and increase security of agents during labours under voltage.Lead sheath cuttingCapacity : Ø (more)

Alroc - AGPB4-1000V

AGPb4-1000V pliers allow to perform a circular and longitudinal cutting on LV cables with lead sheath and increase security of agents during labours under voltage. Lead sheath cutting (more)

Alroc - BRMrd1E

BRMrd1E tool cuts insulation from medium voltage cables and allows to obtain an insulation straight cutting with the BR stop.Insulation straight cuttingNo risk of damage to the cable coreCapacity : (more)

Alroc - CASR/35-75 & CASR/70-110 & CASR/100-160

ASR tools remove semi- conductive insulation shield from cables without damaging the cable insulation. Also, reshapes the insulation to a cylindrical condition.Bonded semi-conductive shield (more)

Alroc - CAUG5/60-160

The AUG5/60-160 tool can be used for peeling the bonded semi conductor for cable preparations.Removing outer sheathMinimal peeling thickness: 2mmCapacity: Ø60 to 160mm (more)

Alroc - CNPT kits

CNPT/630-1-MV-NG:Allow to prepare cables from 50mm² to 630mm² in 12/20 kV. CNPT/240-2-MV-NG:Allow to prepare cables from 50mm² to 240mm² in 12/20 kV. CNPT/240-1-MV-NG:Allow to prepare cables (more)

Alroc - DBT

DBT tool allows to strip quickly and easily low voltage twisted cables from 16 mm2 to 150 mm2. DCSBT/P is a tool for outer voltage labour.Low voltage twisted cables for sections:16–25–35- 54,6 (more)

Alroc - DM 50/95 - DM 95/145

The DM is designed to remove PEHD or lead sheath of variable thickness from high voltage cables. (more)

Alroc - DMS 50/95 - DMS 95/145

The DMS is designed to remove polyethylene jackets of variable thickness from high voltage cables.Removes outer sheath from high voltage cablesAudable sound indication when metallic shield is (more)

Alroc - DMSR/80-160

The DMSR 40/90 is specially designed to remove the HDPE outer sheath also lead sheath of every thicknesses on high voltage cables. The DMS/R is very solid to remove heavy outer sheath. A comparator (more)

Alroc - DSP

DSP tool removes the end of the medium voltage cable peelable semi- conductor after the incision of the LHM1R30/45E toolTo take peelable semi- conductorCompatibility with cable 2000 (UTE C 33-223), (more)

Alroc - EGA

EGA tool allows to spread and to remove the outer sheath from HV cables after realization of longitudinal and circular cutting. (more)

Alroc - EV

The ALROC spreaders facilitate the passing of the shield connection under the outer sheath and the aluminium screen of the cable.Sheath spreading or spaceringFor cable sections from 50 mm2 to 630 mm2 (more)

Alroc - EV/NPT

EV/NPT is designed to spread the outer sheath small tongues from C33- 226 cable without damaging the metalical screen to position the screen.Small tongues spreading from the Outer sheathCompatibility (more)

Alroc - EVP - EV HTB

EVP and EV-HTB spreaders facilitate the lead spreading in regards to the semi-conductive sheet. (more)

Alroc - FENTECRAN/40 - /60

ALROC FENTECRAN plier is an evolution of the ALROCRAN plier. It allows to perform 1, 2, 3, or 4 splits on the outer sheaths and also tighten the sheath onto the pick-plate.Screen-plug (more)

Alroc - GRI

GRI scraper allows to remove external bonded semi-conductor residue stayed on the cable insulation.Scraping of the semi- conductor residueCapacity : sections from 50mm2 to 1200 mm2 (more)

Alroc - GRI-RTE

GRI scraper allows to remove external bonded semi-conductor residue stayed on the cable insulation.Scraping of the semi-conductor residueCapacity : sections from 50mm2 to 1200 mm2Comes in its case (more)

Alroc - K7/FSC

K7/FSC is specially designed to remove bonded semi-conductor from cables by performing a sketch of cone on the semi- conductor and keeping a very clean surface on the insulation.K7/FSC can be (more)

Alroc - LH2 – LH3 – LH4 - LH5

LH tools remove insulation from HTB cables. Insulation removal  (more)

Alroc - LHP2 – LHP4 - LHP5

LHP tools allow to remove one semi-conductor and insulation part to form a channel or a groove form.Realization of a channel in the insulation.Delivered in a wooden box (under request).Blades and (more)

Alroc - LHP5/50-160-NS-G50

LHP5/50-160-NS-G50 tool allows to remove a part of the insulation and the semi-conductor to make a channel or a groove form. This tool is used without lubrication and thrust.Realization of a groove (more)

Alroc - LHS2 - LHS3 – LHS4 – LHS5

LHS tools remove the bonded semi-conductor from the HV cables achieving a very correct surface state.Bonded semi-conductor removal. (more)

Alroc - MF1 - MF1/60

The tool MF1 allows to realize a straight spiral cut and faultless of peelable semi-conductor of cables to loosen it with the hand. Cut of peelable semi- conductor. (more)

Alroc - MF2/40 - MF2/60

Adjustable multifunction tool which allows to perform on cables PE PVC and PR outer sheath and insulation an helicoi?dal and regular cutting at the required length.Compatibility with cables (more)

Alroc - MF3/40 - MF3/60

The MF3 is an adjustable multifunction tool which allows to :Perform a straight and helicoi?dal regular cutting on the cable outer sheath PE-PVC-PRPerform a straight and helicoi?dal regular incision (more)

Alroc - OGEDR

OGEDR tool allows to remove protector sheath of MV cable with Directly Enhanced Burying.L’outil OGEDR permet d’enlever la sur-gaine protectrice des ca?bles HTA a? Enterrabilite? Directe (more)

Alroc - PG BT/

The PG BT (black handles) pliers allow to perform a longitudinal and circular cutting to remove cable outer sheath.Sheath removalSpeed, lightness (more)

Alroc - PG0BT/1113

PG0 BT/1113 pliers allow to perform a longitudinal and circular cutting to remove PE – PVC and PR outer sheath.Sheath cuttingCapacity : Ø5 to 17mm on L : l : H : the outer sheath (more)

Alroc - PINTEL4PI/465

PINTEL4 PI/465 tool allows to perform a circular cutting on the phases of insulated with impregnated paper (CPI) HTA cables in order to remove the paper.Impregnated paper cutting.HTA cables insulated (more)

Alroc - PR4 – PRG3 – PRG4

PR4, PRG3 and PRG4 pliers are specially made to remove cable sheath changing longitudinal cutting penetration by rotation and indication of a 3 positions head or changing longitudinal head.Sheath (more)

Alroc - ROTO-TMG

ROTO-TMG tool allows to hold mechanical straight joint connectors. GFE-TMG option allows to lightly deform the sectoral core from cable. It also allows to tighten the sheath into metallic tape. (more)

Alroc - TC

ALROC-TC tools taper the insulation from all medium voltage cablesALROC-TC tool is previously adjustedStandard taper length : 30 to 40 mmAsk for special taper lengths : 65 mm,95 mm,120 mm (more)

Alroc - TCD2000

TCD2000 is a double section tool especially designed to perform a 30mm to 40mm taper on the cable insulation from cable 2000 (UTE C33-223) with 150mm2 and 240mm2 sections.Insulation taperingALROC (more)

Website by SYN Média inc.